Restore the driveshaft connection on your 1965-1966 Ford Mustang with a 200 6-cylinder engine and C4 automatic transmission using this long-style driveshaft slip yoke. Built as a high-quality reproduction with cast steel construction, this 28-spline slip yoke attaches to the rear of the transmission, connects to the driveshaft, and helps transfer power toward the rear end.
-
1965-1966 Mustang fitment: Built for classic Ford Mustang driveshaft slip yoke applications.
-
200 6-cylinder application: Designed for compatible 200 inline 6-cylinder drivetrain setups.
-
C4 automatic transmission fitment: Made for C4 automatic transmission applications.
-
Long-style design: Measures 8.9 inches in length for the specified Mustang drivetrain setup.
-
28-spline configuration: Built with a 28-spline design for proper transmission output connection.
-
Inner clip U-joint style: Designed for inner clip U-joint applications with a 1-inch cap.
-
Cast steel construction: High-quality reproduction built for strength in the driveline system.
This driveshaft slip yoke is an important driveline component for 1965-1966 Mustang owners running a 200 6-cylinder engine with a C4 automatic transmission. The slip yoke attaches to the rear of the transmission and connects to the driveshaft, allowing the driveline to transfer rotation from the transmission toward the rear axle.
Designed to rotate 1260 U-joints connected to the driveshaft, this long-style 28-spline yoke helps replace worn, damaged, incorrect, or missing driveline hardware. With cast steel construction, 8.9-inch length, 1-inch cap specification, and inner clip U-joint compatibility, it is a strong choice for transmission service, driveshaft repair, drivetrain refreshes, or a clean classic Mustang restoration.
Restore the transmission-to-driveshaft connection on your 1965-1966 Mustang 200 6-cylinder with a long-style 28-spline slip yoke for C4 automatic applications.
| Product Fitment |
| Make |
Ford |
| Model |
Mustang |
| Year Range |
1965-1966 |
| Engine Fitment |
200 6-cylinder |
| Transmission |
C4 Automatic |
| U-Joint Style |
Inner Clip U Joint |
| Installation Location |
Rear of transmission / front of driveshaft |
| Application |
Driveshaft slip yoke replacement, C4 transmission service, driveshaft repair, U-joint service, drivetrain refresh, or restoration |
| Product Specs |
| Product Type |
Driveshaft Slip Yoke |
| Style |
Long Style |
| Length |
8.9 in. |
| Spline Count |
28 Spline |
| Cap Size |
1 in. |
| U-Joint Compatibility |
1260 U-joints / inner clip U-joint style |
| Material |
Cast Steel |
| Function |
Attaches to the rear of the transmission, connects to the driveshaft, and sends power toward the rear end |
| Replacement Use |
Replaces worn, damaged, incorrect, loose, or missing driveshaft slip yoke |
| Package Dimensions |
10 in. L x 4 in. W x 3 in. H |
| Approximate Weight |
2.6 lb. |
