Restore the driveshaft connection on your 1965-1973 Ford Mustang with a 289, 302, or 351W V8 using this 28-spline driveshaft slip yoke. Built as a high-quality reproduction with cast steel construction, this outer clip style yoke attaches to the rear of the transmission, connects to the driveshaft, and helps transfer power toward the rear end.
-
1965-1973 Mustang fitment: Built for classic Ford Mustang driveshaft slip yoke applications.
-
289 / 302 / 351W V8 fitment: Designed for compatible small block V8 drivetrain setups.
-
Automatic or manual transmission use: Made for specified Mustang applications with automatic or manual transmission.
-
28-spline configuration: Built with a 28-spline design for proper transmission output connection.
-
Outer clip style: Designed for outer clip U-joint applications with a 1-1/16 inch cap.
-
1260 / 1310 U-joint compatibility: Rotates compatible U-joints connected to the driveshaft.
-
Cast steel construction: High-quality reproduction built for strength in the driveline system.
This driveshaft slip yoke is an important driveline component for 1965-1973 Mustang owners running a 289, 302, or 351W V8. The slip yoke attaches to the rear of the transmission and connects to the driveshaft, allowing the drivetrain to transfer rotation from the transmission toward the rear axle.
Designed to rotate 1260/1310 U-joints connected to the driveshaft, this 28-spline outer clip style yoke helps replace worn, damaged, incorrect, or missing driveline hardware. With cast steel construction, 1-1/16 inch cap specification, and automatic or manual transmission compatibility, it is a strong choice for transmission service, driveshaft repair, U-joint service, drivetrain refreshes, or a clean classic Mustang restoration.
Restore the transmission-to-driveshaft connection on your 1965-1973 Mustang small block V8 with a 28-spline outer clip style slip yoke for automatic or manual transmission applications.
| Product Fitment |
| Make |
Ford |
| Model |
Mustang |
| Year Range |
1965-1973 |
| Engine Fitment |
289 / 302 / 351W V8 |
| Transmission |
Automatic or Manual Transmission |
| U-Joint Style |
Outer Clip Style |
| Installation Location |
Rear of transmission / front of driveshaft |
| Application |
Driveshaft slip yoke replacement, transmission service, driveshaft repair, U-joint service, drivetrain refresh, or restoration |
| Product Specs |
| Product Type |
Driveshaft Slip Yoke |
| Spline Count |
28 Spline |
| Cap Size |
1-1/16 in. |
| U-Joint Compatibility |
1260 / 1310 U-joints |
| U-Joint Style |
Outer Clip Style |
| Material |
Cast Steel |
| Function |
Attaches to the rear of the transmission, connects to the driveshaft, and sends power toward the rear end |
| Replacement Use |
Replaces worn, damaged, incorrect, loose, or missing driveshaft slip yoke |
| Package Dimensions |
10 in. L x 4 in. W x 3 in. H |
| Approximate Weight |
2.25 lb. |
